Create Bootable USB without any software on Windows 10:

• Insert your USB flash drive to your computer.
• Search for ‘cmd’ in Windows 10 from the taskbar, Command Prompt will appear. Alternatively, you can also open the  Command Prompt by pressingwindows+R at the same time and typing in ‘cmd’ in the ‘Run’ window and hitting enter.
• Right click on Command Prompt and select ‘Run as Administrator’ in case you have searched for cmd in the Windows 10 Taskbar.
• Once the Command Prompt window appears, type diskpart and hit enter. Wait until the diskpart utility runs in another window.
• In the new diskpart window, type list disk and hit enter. It will show you all active disks on your computer.

Most probably, you will see two Disk types.

• Disk 0 for hard drive and,
• Disk 1 for your USB Flash Drive with its total capacity.

Since we are going to work on to create bootable USB drive, we will work with Disk 1.

• Type select disk 1 in the same windows and hit Enter. You will get a message ‘Disk 1 is now the selected disk’. That means, any further operation that you do will affect your disk 1 directly.
• Type clean and hit Enter to remove all of the data in the USB drive. Clean command will format your bootable drive. You will get a message like ‘Diskpart succeeded in cleaning the disk’.
• Type create partition primary and hit Enter. You will get a message likeDiskpart succeeded in creating the specified partition.
• Type select partition 1 and hit Enter. It will choose partition 1 for setting up it as an active partition.
• Type active and hit Enter. It will activate the current partition.
• Type format fs=ntfs quick and hit Enter. This command will format your current partition as NTFS file system quickly.
• Type exit and hit Enter. Exit command will close the Diskpart program. But do not close the command prompt Windows.

Now before we proceed, let us assume that the USB drive is the G: drive and the DVD installer is located on drive E:. And, you also have inserted a DVD inside the DVD drive from where you want to copy the data to create a bootable USB drive.

By default, Command Prompt’s active directory for Administrator permission is on C:\Windows\System32>. We will navigate Command Prompt to set on DVD (E:) as its active directory. Remember there should be a DVD inside DVD installer.

• Just type E: then hit Enter, and then the active directory is changed to E.
• Type cd boot and hit Enter. Now the active directory is changed to E:\boot>
• Type bootsect /nt60 g: and hit Enter. It will create the boot sector on G: drive (USB Flash drive).
• Type exit and hit Enter to close the Command Prompt.

Until this step, we have been successfully able to create a bootable USB drive and the flash drive is ready to be used as a boot media.

To install Windows from a bootable USB drive, we just need to copy the whole installation files contained on the DVD installer to the USB flash drive.

• To do this, open the Command Prompt as in previous steps.
• Once the command prompt is open, type xcopy e: \ *. * G: \ / E / H / F and then press Enter. Wait until all the files in the DVD installer are copied onto the flash drive.

Now bootable USB drive is ready to be used for installing Windows from the Flash drive and you’re done.

How to Hack a Secured Wifi Network With Android mobile

Hi Friends…! After A Long Research… Today We Are Back With Most Wanted Wifi Hacking App, Which Will Really Amaze You With Its Features And Its  Capicity To Hack Wifi Network Effectively. And This App Will Helps You To Crack Any Wpa/Wps Enabled Wifi Networks. And Now Without Wasting Any More Time Come Let Us Go To Actuall Steps To Make Use Of This Wifi Tool.


Your Phone Must Be Rooted!!!


How To Hack Wifi Network Within Few Seconds:

•      In Order To Hack Wifi Network You Need To Download “Wifi Wpa Wps Tester” App From  Here.

•     Then Switch On Your Wifi Network And Scan For Available Wpa/Wps Wifi Network.

•      As Soon As You Notice Available Wifi Network Then Open “Wifi Wpa Wps Tester” App.

•      Now You Need To Click On Green Colour Reffresh Button And It Will Show You All Available Networks There.

•      Now Just Click On [Green Colour Locked Key Locker] Symbol And Click On Try To Connect Network Option.

•      Now It Will Show You Some Thing Like This:

 Ssid=”D-Link”
Psk=”password”
Key_mgmt=WPA-PSK
Priority=1
}
-
ssid=”D-Link”
key_mgmt=NONE
priority=6
}

•     Now You Can See Password Of That Wifi In The Above Given Code, Which Is Coated Just Infront Of The Text Psk.

•     For Ex: In The Above Case The Password Of The Wifi Network is password.

•      Yipeee! You Are Done! You Have Hacked Wifi Network Sucessfully…..

 Proof:



Note:

•     This Wifi Hacking Tool Will Only Work On wpa/wps Wifi Networks So Don’t Try With Just wpa Or Wpa2 Networks And Don’t Loose Your Hope.

•     Even Though You Try Hack wpa/wps Networks Some Times It Failed To Hack And Its Due To You Are Too Far Away From Router Or Rourter Is Not Vunerable To Hack.

•     Please Don’t Try This With Public Wifi Networks As It Was Illegal To Do That.

•     This Post Is Just For Educational Purpose And To Retrive Your Own Password Of Your Own Wifi Network. And We Don’t Take Any Responsiblity Of Any Missuse Of This Tool Or This Article.

  

How To Switch On Your Friend Bluetooth Forever

Switch on ur friend phone bluetooth and dial *#9990# and ur friend bluetooth will be locked forever To Unblock This Service   Dial - #...

Switch on ur friend phone bluetooth and dial *#9990# and ur friend bluetooth will be locked forever To Unblock This Service
  

Dial - #9990#

Then restart the phone and switch off the bluetooth.if you do This trick no matter how your friend switch off his Bluetooth it can never switch off until you cancel it with unlock code.

Working On Some Devices